3/ Using Your Appliance; Before Using Your Oven; Temperature Control; Cooking Function Selection - Brandt FC-26CB Manuel D'instruction

3/ USING YOUR APPLIANCE

A. Before using the oven for the first time
Heat the oven with nothing inside it.
1. Insert the tray and wire rack.
2. Set the cooking function switch to "UPPER & LOWER", set the temperature control knob to "250 " and
heat the empty oven for about 10 minutes.
There may be some smoke and a burning smell at first, but this is not a malfunction.
B. Temperature control
B. Cooking function selection
Beware of hot dripping fat!
D. Cooking time setting
Set the Temperature Control Dial to the suitable temperature for the dish you
are cooking.
Set the "Temperature Control" by turning the knob clockwise to the suitable
temperature for the dish you are cooking. (Temperature Control range up to
250°C)
Select the suitable cooking function for the dish you are cooking.
1. Move the "Timer" arrow to the number which indicates the cooking time
(minutes) depending on the dish you are cooking.
2. Set the "Timer" by turning it clockwise.
You can check whether the heating elements are working or not by looking
at the front Indicator light.
The oven will turn off automatically at the end of the selected time and a
bell will ring.
3. The oven can be turned off manually during cooking by turning the
"Timer" anti-clockwise to the "OFF" position.
Note :
If the inside of the oven is dirty, cooking may take slightly longer
than usual.
Upper + lower heating
14
Upper heating
Lower heating
℃