Carrera RC Spider Fox Mode D'emploi page 11

Dear customer
Congratulation! You bought a Carrera RC-helicopter which has been manufactured
according to today´s state-of-the-art technology. As it is our constant endeavour to
develop and improve our products, we reserve the right to make modifications, either
of a technical nature or with respect to features, materials, and design, at any time,
and without prior notice. For this reason, no claims will be accepted for any slight
deviations in your product from the data and illustrations contained in these instruc-
tions. These operating and assembly instructions are an integral part of the product.
Non-observance of these operating instructions and the safety instructions they con-
tain will render the guarantee null and void. These instructions are to be kept for future
reference and in the event that the product is passed on to a third party.
Guarantee conditions
Carrera products are technically advanced products (NO TOYS) which should be
handled with care. It is important to follow the directions given in the operating instruc-
tions. All components have been subjected to careful inspection (technical modifica-
tions and alterations to the model for the purpose of product improvement are
reserved).
Should any faults nevertheless occur, guarantee is assumed within the scope
of the following conditions: In accordance with the following provisions, Stadlbauer
Marketing + Vertrieb GmbH (hereinafter referred to as "manufacturer") warrants to the
endconsumer (hereinafter referred to as "customer") that the Carrera RC-model-heli-
copter (hereinafter referred to as "product") delivered to the customer shall be free
from defects in material or workmanship for two years from the date of purchase (guar-
antee period). Such defects will, at the manufacturer´s option, either be repaired by
the manufacturer or fixed by delivering new or refurbished parts free of charge. The
warranty does not cover any failure of the product due to normal wear and tear,
improper handling/misuse or unauthorised interference. Any other customer´s claims
asserted against the manufacturer, especially action for damages, shall be excluded.
The contractual and statutory rights of the customer against the seller (supplementary
performance, rescission of the contract, abatement, compensation) which exist with
the product not having been free from defects at the time of the passing of risk, shall
remain unaffected by this warranty.
Claims from this special warranty shall only be valid if:
• the defect reported has not arisen by damage caused by unintended use or misuse
as specified in the instruction manual,
• the failure of the product is not due to normal wear and tear
• the product does not show any signs resulting from repairs or other interferences
carried out by workshops not having been authorised by the manufacturer,
• the product has only been operated with accessories authorised by the manufac-
turer and
• the product is sent in together with the original proof of purchase (invoice / receipt)
and the completely filled in warranty card which has not been altered in any way.
Guarantee cards cannot be replaced.
Note for EU countries: Reference is hereby made to the seller's statutory guarantee
obligation, to the extent that this guarantee obligation is not restricted by the product
guarantee.
The manufacturer shall bear the costs for sending in and returning the product.
This warranty shall be valid to the extent aforementioned and under the above-named
circumstances (including the submittal of the original proof of purchase also in case of
resale) for any future owner of the product.
Damage Limits
STADLBAUER MARKETING + VERTRIEB GMBH SHALL NOT BE LIABLE FOR SPE-
CIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRO-
DUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PROD-
UCT, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLI-
GENCE, OR STRICT LIABILITY. Further, in no event shall the liability of Stadlbauer
Marketing + Vertrieb GmbH exceed the individual price of the Product on which liabil-
ity is asserted. As Stadlbauer Marketing und Vertrieb GmbH has no control over use,
setup, final assembly, modification or misuse, no liability shall be assumed nor
accepted for any resulting damage or injury. By the act of use, setup or assembly, the
user accepts all resulting liability. If you as the Purchaser or user are not prepared to
accept the liability associated with the use of this Product, you are advised to return
this Product immediately in new and unused condition to the place of purchase.
Declaration of conformity
Herewith Stadlbauer Marketing + Vertrieb GmbH declares that this model including
remote control meets the basic requirements of the following EC-guidelines: EN
50371, EN 301489-1 v1.8.1:2008, EN 301489-06 V 1.4.1:2002, EN 50371, EN 300220-
2V21.1.2:2007, 2006/6/EC and 2004/108/EC referring to the electromagnetic compati-
bility and any other relevant requirements of guideline 1999/5/EG (R&TTE).
The original declaration of conformity can be requested from carrera-rc.com.
Contents of package
1x Helicopter Spider Fox
1x 2,4 GHz Controller with LCD Display
1x Battery charger
4x 1.5 V Mignon AA batteries
(non-rechargeable)
1x Lanyard
Requirement for FCC Part 15
Warning: Changes or modifications not expressly approved by the party respon-
sible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installa-
tion. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful interfer-
ence to radio communications.
However, there is no guarantee that interference will not occur in a particular installa-
tion. If this equipment does cause harmful interference to radio or tele vision reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver,
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
11