Safety Instructions For Maintenance; Possible Malfunctions - Bartscher 610.835 Mode D'emploi

When washing use only soft cloths, never scouring pads which may damage the
o
surface of the device.
After washing the device, wipe its surface dry and polish with a soft, dry cloth.
o
Make sure the device has been cleaned and dried properly for further usage.
o

6.3 Safety instructions for maintenance

o Check the mains connection cable for damage from time to time. Never operate the
device when the cable is damaged. A damaged cable must immediately be replaced
by customer service or a qualified electrician to avoid dangers.
o In case of damage or malfunction, please contact your stockist or our customer
service centre. Pay attention to the troubleshooting tips in pt. 7.
o Only a qualified technician and using original spare parts and accessories should
carry out repairs and maintenance of the device. Do not attempt to repair the
device yourself.

7. Possible Malfunctions

If the microwave oven fails to function:
1. Check that it has been properly plugged in. Remove the plug from its socket and
wait approx. 10 seconds, then reinsert it into the socket.
2. Check that a circuit breaker or the main circuit has not been disconnected. If they
are functioning properly, check the connection using other electronic appliances.
3. Check that the door is closed properly (safety lock). If it is not, to ensure safety
microwaves will not be formed inside the cooking chamber.
In the event you are able to exclude the above-mentioned explanations, please
contact qualified technical support personnel or a service center to examine and
repair the device.
- 59 -