Bartscher 610.835 Mode D'emploi page 46

CAUTION!
If the device is set to a high power level, keep it under constant observation!
In the event of strange noises, food products swelling, or liquids churning, reduce
the power level!
Settings
•
When changing settings, rapidly press the buttons two times. If this is not done, the
device will automatically interrupt the setting process.
•
If the settings are accepted, the device will confirm this with an audible signal.
•
A double signal means the device has not accepted the settings entered. Check the
settings and attempt to enter them again.
Deleting settings
•
If you wish to delete settings prior to cooking, press the button marked Stop/Reset
Interrupting or finishing a function
•
To pause the device, press the button market Stop/Reset
•
To reactivate the device, close the door and then press the button marked Start
•
If you wish to complete the cooking process, press for a second time the button marked
Stop/Reset
End program
•
At the end of a program a signal is sounded. The display will read „END". You may
remove food products from the microwave oven.
WARNING! Danger of burns!
Dishes used for cooking may be very hot, as heat is emitted from the food product.
Use protective gloves or a towel when removing dishes.
•
After cooking food products with large amounts of water, leave the door to the device
cracked open to allow the cooking chamber to dry out.
to delete all commands
or open the door.
- 45 -
.
.