Safety Instructions For Maintenance - Bartscher 610.836 Mode D'emploi

To remove dirt, wash the door, door seals and attached elements with a moist cloth.
o
Do not use harsh cleaning agents.
Do not get the control panel overly wet. Wash it with a moist, soft cloth. Do not close
o
the door while washing the device, to avoid accidentally turning it on.
Wash the rotating ring and rotating tray regularly by using a small amount of washing-
o
up liquid or by placing them in a dishwasher.
If condensation forms on the inside or outside of the door, remove it with a soft cloth.
o
Condensation forms when the device is operated in conditions of high humidity.
This is a normal occurrence.
Unpleasant odours can be removed from the device by placing a glass of water with
o
lemon juice and lemon peel, then heating for approx. 5 minutes. Afterwards, wipe the
device thoroughly with a soft, dry cloth.
When washing use only soft cloths, never scouring pads which may damage the
o
surface of the device.
After washing the device, wipe its surface dry and polish with a soft, dry cloth.
o
Make sure the device has been cleaned and dried properly for further usage.
o

6.3 Safety instructions for maintenance

o Check the mains connection cable for damage from time to time. Never operate the
device when the cable is damaged. A damaged cable must immediately be replaced
by customer service or a qualified electrician to avoid dangers.
o In case of damage or malfunction, please contact your stockist or our customer
service centre. Pay attention to the troubleshooting tips in pt. 7.
o Only a qualified technician and using original spare parts and accessories should
carry out repairs and maintenance of the device. Do not attempt to repair the
device yourself.
- 35 -