Bartscher 610.835 Mode D'emploi page 56

Sequential cooking
The device allows you to select up to three programs to operate in sequence.
DEFROSTING should be selected before cooking.
If you wish to select the cooking program displayed below, the device must be
programmed in the following order:
1. Turn the Time / Menu dial counter-clockwise until the display reads „A-09" and
„CODE".
2. Press
3. Turn the Time / Menu dial to set defrosting time (5 minutes).
4. Press
5. Turn the Time / Menu dial to set the cooking time.
6. Press
7. Turn the Time / Menu dial to set the cooking time.
8. Press Start
Auto-Menu
„Auto-Menu" fallows the automatic cooking or heating of food products without needing
to set the power level or cooking time. It is enough to know the type of product and its
weight.
1. In Standby mode, turn the Time / Menu dial counter-clockwise and choose the
desired program (see list below).
2. Press
3. Press Start
Microwave cooking
Convection cooking (without pre-heating)
.
to set the power level.
to set the air temperature for convection cooking.
.
until the proper weight has been selected.
.
Defrosting
- 55 -