Bartscher 610.835 Mode D'emploi page 45

General tips for use
•
Place the rotating tray elements
depression at the bottom of the cooking
chamber.
•
Place the rotating tray with the grooved
⑧
side at the bottom, on the bottom of the
cooking chamber, and turn until the plate
locks into the tray drive
Heating and cooking
•
Prior to turning the microwave oven on, check that the rotating tray
④
ring are properly installed. The cooking chamber must be clean; the rotating
④
ring must be located in the depression; the rotating tray
⑤
the tray drive
•
Place the dish with food product on the rotating tray. Nothing should extend beyond
the edge of the rotating tray. Do not heat / cook food products placed directly on the
rotating tray. In the event of heating / cooking larger quantities of food cut into
pieces, ensure they are evenly distributed throughout the dish used for cooking and
that they do not touch one another.
CAUTION!
Never activate the device without the rotating tray and a container for food products,
nor without food products!
•
Close the door to the device and check that the seals are clean, and that the door
closes properly.
•
Set the desired operating mode, power level and cooking time (see below), and turn
the device on.
•
The cooking chamber lights up, and the glass turning plate rotates. Remember that
the turning plate must always be able to rotate freely.
- 44 -
④
⑤
.
.
into the
⑧
and rotating
⑧
must be secured to
⑧
④
⑤