Easy Cook Troubleshooting Guide - Atag ZX6011N Mode D'emploi

I
f you realize that...
Beeps and symbols
The symbol --- is flashing in
the display panel.
"Auto" is displayed
The "EASY COOK" feature
selector, symbols and tem-
perature are blinking and a
beep is audible.
the "EASY COOK" function
D
elayed cooking:
Turn the selector to "EASY COOK" .
Choose which dish you are going to cook from the display
panel using the button.
Place your dish in the oven and shut the door.
Turn method selector to "
Turn the knob + or - to set the time you want the food cooked
by.
E.g. 1 pm (13:00).
When you have done this the start of cooking will be delayed.
The cooking time is worked out automatically. As when
cooking straightaway, the time allowed may be adjusted by
the oven during cooking and the end result may vary by a cou-
ple of minutes (+ or -) compared with the initial time given.
T
ips:
Once it starts flashing however, if you open the oven door, it
will make a warning sound and the dishes symbol will blink.
Once the "Auto symbol" appears in the display panel, you can
open the oven door.
The "EASY COOK" feature MUST START WITH A COLD
OVEN. You must wait for the oven to cool down completely
before using the Easy Cook method again. If the oven is not
cool enough, the temperature and the dish symbols will blink
in the display panel and you will not be able to cook.

EASY COOK troubleshooting guide:

P
ossible causes
• You have opened the door
while the oven is scanning.
The programme has been can-
celled.
• The oven is calculating the
best cooking time.
• The oven has now worked
out the appropriate cooking
time.
• The oven is too hot to use
the "EASY COOK" feature.
instructions for use
" .
W
hat should you do?
- Let the oven cool down and
try again.
- This is perfectly normal.
- This is perfectly normal.
- Either wait for the oven to
cool down or use a different
cooking method.
101