Carrying Out Economical Cooking - Atag ZX6011N Mode D'emploi

carrying out economical cooking *

The programmer should only display the time and this should
not be flashing.
• Turn the function selector to the "
indicator lights up on the display.
• Place your dish in the oven following the recommendations
shown on the display.
For example: for the "
1 or 2 are recommended.
•Your oven will recommend the optimal temperature for the
chosen cooking mode: 200ºC.
Nevertheless, you may adjust the temperature if you wish by
using the button located under the display.
For example: "
After these steps, the oven begins to heat up:
The temperature indicator lights up and shows you the tem-
perature rising inside the oven.
You will hear three beeps when the set temperature is rea-
ched.
For optimal "ECO" cooking, do not carry out preheating and do
not open the door.
*
This position allows you to make a 20% saving in energy
while at the same time achieving identical cooking results.
The ECO position is used for the energy label.
Following a cooking cycle, the oven's fan conti-
nues to operate for a while afterwards in order to
ensure that everything cools down properly.
how to use your oven
"position. The "ECO"
" " position -> oven shelf levels
" position adjusted to 200ºC.
89