General Maintenance; Changing The Light Bulb - Atag ZX6011N Mode D'emploi

general maintenance

changing the light bulb

bulb fitting
unscrew
cover
98
Leave the oven to cool down before cleaning it manually.
In general, don't use any type of scouring powder or metal-backed
sponge, or any sharp objects for cleaning.
• The bulb is located in the top of the oven.
Warning! Switch off the power at the main switch before attemp-
ting to change the bulb. Leave the oven to cool if necessary.
- Turn the protective shade to the left a quarter of a turn.
- Unscrew the bulb in the same direction.
The bulb used is a:
- 15 W
- 220-240 V
- 300°C
- E 14 screw-fitting bulb
- Change the bulb, then refit the protective shade.
- Plug the oven back in.
Note: It is easier to unscrew the shade and bulb if you wear a rubber
glove.
~