Depaepe SecurAccess PMR Notice D'utilisation page 37

Notice SecurAccess PMR
Setting to modify
Settings
M1 storing for key 1
3. Enter the number to store (memory) or the setting change number.
Settings
M1 storing for key 1
4. Confirm by entering *9
Settings
M1 storing for key 1
5. Repeat the operation for other settings choices or terminate by hanging up or by
entering 99 for immediate hanging up.
Example N°1: In the local programming mode, storing number 18 in Memory key 1 (without chain
dialing)
Settings
M1 storing for key 1
Keep M1 depressed (front panel button) and * (small keypad inside)
Release M1
Release * button
Enter
2 "beep" tones
Enter
2 "beep" tones
Enter
Enter
2 "beep" tones
Example N°2: In the remote programming mode, change loudspeaker volume to "medium"
Settings
Loudspeaker volume
Calling the SecurAccess using a Tone dialing telephone.
Dial 0XNNNNNNNN
2 "beep" tones
Enter
Setting access code
Code Setting choice
2 0 Number (22 digits max.)
Number to store or parameter to change
Code Setting choice
2 0 Number (22 digits max.)
Code Setting choice
2 0 Number (22 digits max.)
Code Setting choice
2 0 Number (22 digits max.)
0000
20
18
*9
Code Setting choice
06 Low: 0 – Medium : 1 – High : 2
*
2 "beep" tones: entering the programming mode
4 digits access code (0000: factory settings)
Confirming entering the programming mode
Setting code access
Confirming the entry
Number to store (18 in this example)
Confirming stored setting
Confirming the operation
Calling the SecurAccess
The SecurAccess answers and goes off-hook
Entering the programming mode
* 9
* 9
Setting confirmation
* 9
Conf.
*9
Conf.
*9
37