Description - Depaepe SecurAccess PMR Notice D'utilisation

Notice SecurAccess PMR

1. Description

The SecurAccess PMR telephone allows a full handsfree call simply by pressing a button. When the
call is terminated, it will automatically hang up.
The SecurAccess can also activate:
two doors latches relays remotely or locally when entering a stored code
-
- a dry contact during the conversation for driving an alarm, a camera or any other electrical
appliance.
- Activate a door or double security door latch relay when pressing a button (NC driving
contact).
Note: this feature is not powered by the telephone line.
The SecurAccess PMR comes with a "Disabled compatible" feature which generates both
audible (digital voice announcement factory programmable in the selected language) and
visible (enlightened colour icons) signals for a clear understanding of the door-phone
operations status.
Note: this feature will only work when the external power supply is connected
The SecurAccess PMR has a built-in speaker overboost feature with 10 dB amplification. This feature
requires an external power supply complying with CE EN60950-1:2006 BT TRT3 specifications.
The SecurAccess PMR complies with IP65 and IK09 protection specifications. Moreover, a built-in
heating resistor, requiring the same as above external power supply (included), provides safe and
reliable operations even in very humid environments.
Main features:
1. Calling
Model with 1 up to 8 programmable off-hook and memory buttons
Model with keyboard and 1 up to 4 programmable off-hook and memory buttons. One button
can be used to go off-hook and dial with the keypad provided that nothing is stored into its
memory.
Chain dialing: automatic dialing of a sequence of pre stored numbers (up to 5 numbers – 22
digits max - can be stored in each button)
Dialing sequence can be automatically repeated in case of busy line or no answer (up to 9
times)
2. Auto answer
An auto answer mode can be activated for calling a party standing close to the SecurAccess or
to enter the remote programming mode.
The SecurAccess will automatically go off-hook after a pre programmed number of rings :
From 1 up to 9 rings when automatic off-hook selection is activated
-
After 30 rings otherwise. (see section § 4.9)
-
3. Automatic line disconnection
Automatically when the conversation is over (by busy line tone detection)
When a limited timed conversation has been programmed
4. Door latch activation
28