Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Notice SecurAccess PMR
A list of 3 numbers stored. Repeated dial selection is 0. In case of busy tone and (or) no answer, the
SecurAccess will dial one time the list of 3 numbers and will hang up.
3.9. Ringer
3 levels adjustment: off-low-high and 3 melodies selection. Adjust as shown:
Setting to modify
Ringer level
Ringer melody
3.10. Automatic answering
An auto answer mode can be activated for calling a party standing close to the SecurAccess or to
enter the remote programming mode. The SecurAccess will automatically go off-hook after a pre
programmed number of rings:
-
From 1 up to 9 rings when automatic off-hook selection is activated After 30 rings otherwise.
Setting to modify
Auto answer
3.11. Door latch activation and power schematic
The SecurAccess is fitted with two NO/NC driving contacts for a remote activation of a door latch
electrical relay.
Following settings can be chosen by local or remote programming:
1. Activation or deactivation of door latches
2. Activation duration
3. 4 digits access code selection (up to 6 different access codes, Note: 0000 will not work)
4. Fast opening selection for the door latch n°1
Setting to modify
Door latch N°1activation
Activation duration door latch N°1
1
st
access code door latch N°1
2
nd
access code door latch N°1
3
rd
access code door latch N°1
4
th
access code door latch N°1
5
access code door latch N°1
th
6
th
access code door latch N°1
Fast opening door latch N°1
with « 0# » or « 0* »
Door latch N°1activation
Activation duration door latch N°2
Code
Setting choice
Factory settings are shown in grey
0 3
Low : 0 - High : 1
0 4
0 : ringer off
1 : Melody N°1
2 : Melody N°2
3 : Melody N°3
Code
Setting choice
Factory settings are shown in grey
0 5
Enter the number of rings before auto answer (0 up to 9)
Note: 0 = feature deactivated
3 = factory setting
Code
Setting choice
Factory settings are shown in grey
6 0
0 : remote and local activated (factory setting)
1 : remote and local deactivated (Door latch not active)
2: remote activated and local deactivated
3: remote deactivated and local activated
6 1
Enter the number of seconds (from 1 up to 9 seconds).
factory setting = 2 seconds
6 2
Enter a 4 digits code, (0000 not allowed)
6 3
Enter a 4 digits code, (0000 not allowed)
6 4
Enter a 4 digits code, (0000 not allowed)
6 5
Enter a 4 digits code, (0000 not allowed)
6 6
Enter a 4 digits code, (0000 not allowed)
6 7
Enter a 4 digits code, (0000 not allowed)
6 8
0 = deactivation (factory setting) - 1 = activation
7 0
0 : remote and local activated (factory setting)
1 : remote and local deactivated (Door latch not active)
2: remote activated and local deactivated
3: remote deactivated and local activated
7 1
Enter the number of seconds (from 1 up to 9 seconds).
40
Conf
*9
*9
Conf.
*9
Conf.
*9
*9
*9
*9
*9
*9
*9
*9
*9
*9
*9
Publicité
Table des Matières
