Changing The Lamp; Decommissioning The Appliance - Angelo Po FX 61 E 1-2 Manuel D'utilisation Et D'installation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

CHANGING THE LAMP

To carry out this operation, proceed as follows.
1 – Undo the screws and remove the lamp cover (A).
2 – Extract and replace the lamp (B).
Caution - warning
During the procedure, take care not to touch the lamp directly; wear protective
gloves if necessary.
3 – Replace the lamp cover (A) and retighten the screws when the operation is complete.

DECOMMISSIONING THE APPLIANCE

When decommissioning the appliance, a series of procedures must be carried out to
ensure that the appliance and its components are not a hindrance and are not easily
accessible.
To ensure that the appliance cannot constitute hazards for people or the environment,
all energy sources (electricity, etc.) must be disconnected and rendered unusable, and
any liquids present must be drained (lubricants, fluids, etc.).
Place the appliance in a suitable area which is not easily accessible, with barriers to
prevent anyone from accessing it.
When scrapping, sort all components by chemical characteristics and dispose of them
separately in accordance with the relevant legal requirements.
Important
Do not dump non-biodegradable products, lubricating oils, and non-metallic
components (rubber, PVC, resins, etc.) in the environment. Dispose of them in
compliance with the relevant laws.
`
English
A
B
- 31 -
IDM-39617702300.tif
Use and installation manual
IT
GB
DE
FR
ES

Publicité

Table des Matières
loading

Table des Matières