Glossary - Mennekes Basic 3,7 Instructions De Fonctionnement Et D'installation

Masquer les pouces Voir aussi pour Basic 3,7:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

11. Storage
Proper storage can positively affect and maintain the oper-
ability of the device.
f Clean the device before storing.
f Store the device in its original packaging or by using
suitable packaging in a clean and dry place.
f Observe permissible storage conditions.
Permissible storage conditions
Storage temperature
Average temperature over
24 hours
Relative humidity
12. Disposal
The disposal of old devices must comply
with the common national and regional laws
and regulations. Ecological considerations
must be taken into account. Old devices
and batteries cannot be disposed of with
household rubbish.
f Dispose of the device in accordance with the applicable
environmental regulations of your country.
f Dispose of old devices through your specialised dealer.
f Dispose of old batteries in a recycling bin for old
batteries or through the specialised dealer.
f Dispose of the packaging material in the recycling bin
for cardboard, paper and plastic.
13. Accessory
Accessories such as protective roofs or charging cables
can be found on our homepage under "Accessories".
https://www.chargeupyourday.com/
-25°C... + 40 °C
< 35 °C
max. 95 %
(non-condensing)

14. Glossary

Term
Explanation
Auto switch
The charging station detects the con-
nected charging cable and controls
two separate load circuits (16 A / 32
A) with corresponding fuse protection.
Consequently, both 20-A and 32-A
charging cables can be used at a single
charging point.
CP communi-
Modular DIN rail component for commu-
cation box
nication with the vehicle and for control-
ling the contactors.
EHC
Electronic household counter
RCCB
Residual current circuit breaker
Type A = sensitive to pulse currents,
Type B = sensitive to universal currents
Load manage-
Automatic adaptation of the charging
ment
current to avoid an overload situation.
CB
Circuit breaker
Mode 1 (IEC
Charging mode for vehicles
61851)
with no communication interface
on charging sockets with a
rated current of up to 16 A.
Mode 3 (IEC
Charging mode for vehicles with a
61851)
communications interface at charging
sockets type 2.
Type 2 (IEC
Single and three phase charging coup-
62196-2)
lers with identical plug geometry for
charging powers from 3.7 to 44 kW AC.
EN
25

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Basic 11Basic 22Basic s 22

Table des Matières