Configuring The Welding Unit; Understanding The "Settings" Sub-Menu; Selecting The Display Language; Setting The Clock - Hürner HST 300 aquatherm 2.0 Manuel Utilisateur

extension cable, or a tripped cut-out in the mounting box. The next
welding operation is still possible after acknowledging the message
by pressing the STOP/RESET key.
7

Configuring the Welding Unit

After pressing the MENU key, the welding unit can be reconfigured.
This displays on the screen what is shown in Display 6.
The "Settings" that can be called from this screen by pressing the
MENU key once again are the parameters related to the welding unit
itself and its operation.
On the screen that opens, use the ñ and ò arrow keys to select the
desired set-up option. The "M" shown next to every set-up option indi-
cates that a sub-menu is accessible for it by pressing the MENU key.
Press the START/SET key to confirm the set-up and save it to
memory.
7.1

Understanding the "Settings" Sub-menu

"Language – M – " means that by pressing the MENU key, the user
can access a sub-menu for selecting the display and report lan-
guage (see Sect. 7.1.1).
"Date/Time – M – " means that by pressing the MENU key, the user
can access a sub-menu for setting the clock (see Sect. 7.1.2).
"Buzzer Volume – M – " means that by pressing the MENU key, the
user can access a sub-menu for setting the volume of the status
buzzer (see Sect. 7.1.3).

7.1.1 Selecting the Display Language

When the "Select Language" sub-menu was selected, the screen
changes and the available languages (see Display 22) appear.
Use the arrow keys ñ and ò to select the desired display language
and confirmby pressing the START/SET key.

7.1.2 Setting the Clock

When the "Set Clock" sub-menu was selected, the screen changes and
the display reproduced in Display 23 appears.
The time of day and the date can be set using the arrow/cursor keys
of the welding unit. The portions "Hour," "Minute," "Day," "Month,"
and "Year" are set separately. Press the START/SET key to confirm your
settings.

7.1.3 Setting the Buzzer Volume

When the "Set Volume" sub-menu was selected, the screen changes
and the display reproduced in Display 24 appears. The buzzer can also
be heard. Turn the buzzer volume up or down to the desired value
using the ï, ð arrow keys (from 0 to 100) and confirm your setting
by pressing the START/SET key.
10
EN
HST 300 aquatherm 2.0 User's Manual
a q u a t h e r m G m b H
Biggen 5
57439 Attendorn, Germany
>Settings -M-
Display 6
*** SET-UP MENU ***
>Language -M-
Date/Time -M-
Buzzer Volume -M-
Display 7
***** LANGUAGE *****
>Deutsch
English
Francais
Display 8
Date/Time
21.06.13 14:28
Display 9
Buzzer Volume
< ------20-------- >
Display 10
Version July 2014