Call/Leave The Setup Menu, Save Settings - Sygonix 1423058 Notice D'emploi

b) Call/Leave the Setup Menu, Save Settings
Briefly push the control lever to call the setup menu.
The setup menu is displayed in the screen image; see
figure on the right.
To save all settings, select "SAVE" and then briefly
push the control lever.
To leave the setup menu, select "EXIT" and then briefly
push the control lever. The setup menu display will
then disappear from the screen.
After leaving the setup menu without saving the settings with "SAVE", they will be lost if the
power supply is disconnected or a power outage occurs!
Therefore, do not forget to select "SAVE" first before leaving the setup menu and confirm by
briefly pushing the control lever. Then all settings made are retained when the power fails. Then
you can leave the setup menu via "EXIT".
34