Starting A Cold Engine - Yamaha Banshee 350 Manuel Du Propriétaire

EBU00512

Starting a cold engine

w
Always make sure all control cables work
smoothly before you begin riding in cold
weather. If the control cables are frozen or
do not work smoothly, you could be unable
to control the ATV, which could lead to an
accident or collision.
1. Set the parking brake.
2. Turn the fuel cock to "ON".
3. Turn the main switch to "ON" and the engine
stop switch to "RUN".
4. Shift the transmission into neutral.
5. Use the starter (choke) in reference to the
figure:
6-3