Yamaha Banshee 350 Manuel Du Propriétaire page 278

w
1. Coolant reservoir hose
2. Coolant reservoir
1. Flexible du vase d'expansion
2. Vase d'expansion
1. Manguera del depósito de refrigerante
2. Depósito de refrigerante
q
8-33
6. Disconnect the hose on the coolant reser-
voir side and drain the coolant from the
coolant reservoir.
7. After draining the coolant, thoroughly flush
the cooling system with clean tap water.
8. Replace the coolant drain bolt washers if
they are damaged, and then tighten the
coolant drain bolts to the specified torque.
Tightening torque
Coolant drain bolt:
14 Nm (1.4 m0kgf)
9. Install the coolant reservoir hose.
10. Pour the recommended coolant into the
radiator until it is full.