Starting A Cold Engine - Yamaha KODIAK YFM400AR Manuel Du Propriétaire

Starting a cold engine

WARNING
_
Always make sure all control cables work
smoothly before you begin riding in cold
weather. If the control cables are frozen or do
not work smoothly, you could be unable to
control the ATV, which could lead to an acci-
dent or collision.
_
1. Apply the rear brake lever.
2. Turn the fuel cock to "ON".
3. Turn the main switch to "ON", and then set
the engine stop switch to "
4. Shift the drive select lever into the neutral po-
sition.
6-3
EBU01265
".