Operation; Starting A Cold Engine - Yamaha YFM100T 1987 Manuel Du Propriétaire

OPERATION
Make sure they move smoothly before start-
ing.
1. Turn the ignition key to the "ON" and
Before riding this machine, become thorough-
the engine stop switch to the "RUN".
ly familiar with all operating controls and
2. Shift the transmission into the neutral
their function. Consult a Yamaha dealer
position.
regarding any control or function you do not
thoroughly understand. NOTE"
--NOTICE: This model is equipped with a starting circuit
cut-off switch.
This model is not equipped with highway
The engine can be started under the following
approved lighting. This model is designed
conditions.
strictly for off-road riding use and should
a. When the transmission is in neutral. At
not be used on a street or highway at any
this time the nuetral indicator light
time. In most instances, it is illegal to ride
this model on any public street or high- (green) should be on.
If the light does not come on, ask a
ways. Yamaha dealer to inspect it.
Starting a cold engine b. When the rear brake lever is disengaged
with the transmission in gear.
in cold districts, control wires may freeze.
6-1