Remote Control Operation - Skandika V 3000 Instructions De Montage Et Mode D'emploi

Remote control operation

The V 3000 vibrating plate as an innovative novelty is equipped with an LED color display
on the device computer and an LCD display on the remote control. State-of-the-art tech-
nology ensures that the training processes are shown on both displays at the same time.
For secure communication between the device computer and the remote con-
trol, it is therefore necessary to point the remote control directly at the display
of the device computer at a distance of no more than 1 meter. Moving the remote
control further away or moving it to other positions may result in faulty data transmissi-
on.
If such problems occur, please switch off the device computer using the remote control
firstly. Then switch off the remote control (the remote control must NOT be aligned with
the vibration plate). If both devices are switched off, point the remote control back to
the device computer within one meter distance and switch on the device computer by
pressing the „Power" button on the remote control (see fig.1). Now press the „Function"
button to select one of the 7 main functions of the device (fig.2 / fig. 3). Then press the
„Power" button on the remote control again to start the device (fig. 4).
Fig. 1:
Fig. 2 / 3:
Fig. 4:
22