Computer Operation - Skandika REGATTA OXFORD PRO PLUS Instructions De Montage Et Mode D'emploi

Computer operation

The computer is designed for easy use and provides an easy-to-read display. It will start working
automatically when exercising or pressing the button. After approx. 4 minutes without any activity
the computer will automatically switch off.
The buttons and their meaning
MODE
Switches between the lower described functions SCAN, TIME, COUNT, T.COUNT,
DIST and CALORIES. The selected function is displayed accordingly. If "Scan" is
selected, an automatic display change is active: each value will be displayed for
appr. 4 seconds.
SET With this button you can preset values for some functions. How this all works in
detail, we will explain later in this manual.
RESET Press and hold this button when „Time", „Count" or „Calories" is active and you
will set these values to 0 accordingly (reset).
The computer functions
With the help of the MODE-button you can select one function. This function then will be shown
in the display. Also when selected, you can edit this value for presetting (not all functions are pre-
settable).
SCAN
Automatically scans through each function in sequence every 4 seconds.
The display will show one value for 4 seconds in the display and then switch to the
next.
TIME Displays current exercise elapsed time (from 00:00' to 99:59' minutes).
How to enter a preset time value:
You may set a target time before exercise. Time then will countdown from
your preset value when start to exercise. As soon as 0:00 is reached, the computer
will beep to remind you that your time is over. Select TIME with the MODE-
button and use the SET-button to set your target time.
COUNT
If you have chosen this function the display shows the strokes of your actual
workout. Display range: 0 - 9999
How to enter a preset value:
You may preset a target figure for strokes. Please proceed as described under
point "Time" accordingly. The strokes are then counting downwards.
T-COUNT The display shows the accumulated strokes done with this device.
If batteries will be removed, the value will be set to zero.
Display range: 0 - 9999
DIST
If you have chosen this function the display shows the current distance rowed.
Display range: 0 - 9999
22