Reassigning The Audio Input; (Audio Assign) - Sony HT-CT500 Mode D'emploi

Reassigning the audio
input

(Audio Assign)

You can reassign an audio input that has an audio
(analog) signal to the "VIDEO 2" function, if TV
ASSIGNABLE AUDIO IN jacks are not being
used.
To output the audio source of a component that
has analog audio jacks:
– Connect the audio jacks of the component to
the TV ASSIGNABLE AUDIO IN jacks.
– Assign "VIDEO 2" function.
YELLOW BLUE
DISPLAY
C, X, x, c,
HOME
RETURN/
EXIT MENU
PRESET REPLAY
TUNING
1
Press GUI MENU.
"GUI MENU" appears in the front panel
display of the subwoofer and the GUI menu
appears on the TV screen.
2
X/x
Press repeatedly to select
[Settings], then press
The settings menu appears.
3
X/x
Press repeatedly to select [Audio],
then press .
The audio menu appears.
4
X/x
Press repeatedly to select [Audio
Assign], then press
5
X/x
Press to select [VIDEO 2], then
press .
The TV ASSIGNABLE AUDIO IN jacks
are assigned to the "VIDEO 2" function.
The default setting is "TV," meaning the TV
ASSIGNABLE AUDIO IN jacks are
assigned to the "TV" function.
RED GREEN
GUI
GUI MENU
MENU
TOOLS/
OPTIONS
ADVANCE PRESET
TUNING
or c.
or c.
6
Press GUI MENU.
The GUI menu turns off.
Notes
• When images of an audio component are output, the
sound may not be output. In this case, check the
following:
– Confirm the audio analog input jacks correspond
with the function.
– Reassign the function.
• You cannot use the analog audio input for the original
input if it has been reassigned to another input.
• You cannot reassign the analog audio input to other
than the "TV" or "VIDEO 2" function.
81
US