Sony HT-CT500 Mode D'emploi page 31

Notes
• When your TV does not have an HDMI jack and you want to use the TV and other components with this system,
connect the components' video jacks to the TV's video jacks directly and the components' audio jacks to the
subwoofer's audio jacks. However, in this case, you cannot use the GUI menu on the TV. Set up the system using
the front panel display of the subwoofer (page 95).
• Do not turn off the system when video of the playback component is being output to the TV. If the system is not
turned on, audio of the playback component is not output from the speaker.
Tip
• To output TV sound from the speaker connected to the subwoofer, be sure to
– connect the audio output jacks of the TV to the OPTICAL TV IN jacks or TV ASSIGNABLE AUDIO IN jacks
of the subwoofer.
– turn off the TV's volume.
Connecting a component to the VIDEO 1 jacks
The following illustration shows how to connect a component that has analog jacks.
Rear of the
subwoofer
DVD player (recorder), "PlayStation 2,"
satellite/cable television tuner, etc.
Audio signal
A
EZW-T100
BD IN DVD IN SAT/CATV IN
OPTICAL
ONLY FOR SS-CT500
L
DIGITAL
CENTER
ASSIGNABLE
L
R
DC 5V ONLY FOR
0.7A MAX SS-CT500
SPEAKER
R
AUDIO IN
REMOTE
DMPORT TV
CTRL
A Audio cord (not supplied)
B Video cord (not supplied)
Video signal
B
AM
FM
75 COAXIAL
ANTENNA
TV OUT
HDMI
COAXIAL
TV IN VIDEO 2 IN VIDEO 3 IN VIDEO 3 IN
VIDEO IN COMPONENT VIDEO IN
Y
L P /
B
C
B
P /
R
C
R
R
AUDIO IN
VIDEO 1 VIDEO 2 VIDEO 3
: Signal flow
continued
31
US