Setting The Bluetooth Audio Codecs; Setting The Bluetooth Standby Mode - Sony MHC-ECL99BT Mode D'emploi

Setting the BLUETOOTH
audio codecs
(except for North American model)
1
Press BLUETOOTH to select
the BLUETOOTH function.
"BT AUDIO" appears on the display.
Note
If the BLUETOOTH connection is
established, terminate the BLUETOOTH
connection. See "To terminate the
BLUETOOTH connection" (page 23).
2
Press OPTIONS.
3
Press  /  repeatedly to select
"BT:AAC," then press
4
Press  /  repeatedly to select
"ON" or "OFF," then press
ˎ ON: Select this setting if the
BLUETOOTH device supports
Advanced Audio Coding (AAC).
ˎ OFF: Select this setting if the
BLUETOOTH device only supports
Sub Band Codec (SBC).
Note
You can enjoy high quality sound if the AAC
is selected. In case you cannot listen to AAC
sound from your device, select "OFF."
24
GB
Setting the BLUETOOTH
standby mode
The BLUETOOTH standby mode
enables the system to turn on
automatically when you establish
the BLUETOOTH connection with a
BLUETOOTH device.
1
Press OPTIONS.
2
Press  /  repeatedly to select
"BT:STBY," then press
3
Press  /  repeatedly to select
"ON" or "OFF," then press
When the BLUETOOTH standby
mode is set to on, the system waits
.
for a BLUETOOTH connection even
when the system has been turned
off. When a BLUETOOTH connection
.
is established, the system turns on
automatically.
Hint
Disable the BLUETOOTH standby mode to
reduce the power consumption in standby
mode (eco mode).
.
.