Converting The Resolution Of Analog Video Input Signals - Sony HT-CT500 Mode D'emploi

Converting the resolution
of analog video input
signals
(Resolution)
You can change the resolution of analog video
input signals using the [Video] settings menu.
You cannot set this function for HDMI video
input signal.
For details on resolution, see "Video input/
output conversion table" (page 36).
YELLOW BLUE
DISPLAY
C, X, x, c,
RETURN/
EXIT
PRESET REPLAY
TUNING
1
Press GUI MENU.
"GUI MENU" appears in the front panel
display of the subwoofer and the GUI menu
appears on the TV screen.
2
X/x
Press repeatedly to select
[Settings], then press
The settings menu appears.
3
X/x
Press repeatedly to select [Video],
then press .
[Resolution] appears.
4
Press or c.
The parameter menu appears.
5
X/x
Press repeatedly to select the
desired parameter, then press
• [AUTO]: Normally select this. The
unit outputs signals starting
from the highest resolution
acceptable to the TV. If the
resulting image format is
82
US
RED GREEN
GUI
GUI MENU
MENU
HOME
TOOLS/
MENU OPTIONS
ADVANCE PRESET
TUNING
or c.
.
undesirable, try another
setting that suits your TV.
• [480/576p]: Outputs 480p/576p video
signals.
• [720p]: Outputs 720p video signals.
• [1080i]: Outputs 1080i video
signals.
• [1080p]: Outputs 1080p video
signals.
For details on operating, see "Video input/
output conversion table" (page 36).
6
Press GUI MENU.
The GUI menu turns off.