Listening To The Radio - Sony HT-CT500 Mode D'emploi

4
Press X/x repeatedly until "Memory?"
appears in the front panel display.
5
Press .
A preset number appears in the front panel
display.
6
Press X/x to select the preset number
you want.
Tip
• You can select the preset number directly by
pressing the number buttons.
7
Press .
The station is stored.
8
Press MENU.
9
Repeat 2 to 8 to store other stations.
To change the preset number
Restart from step 3.
Changing the AM tuning
interval
The AM tuning interval can be set to either 10
kHz or 9 kHz.
1
Tune in to an AM broadcast.
2
Press ?/1.
The system enters standby mode.
3
While holding down INPUT SELECTOR,
press ?/1 of the subwoofer.
The interval changes to that shown in the
front panel display: "AM 9k Step" or
"AM10k Step."
If you want to return to the previous
interval, perform steps 1 to 3 again.
Note
• If you change the interval, all AM preset stations will
be erased.

Listening to the radio

Preset radio stations in the system's memory first
(see "Presetting radio stations" (page 67) or
"Presetting radio stations" (page 68)).
TV INPUT
BD DVD
VIDEO1 VIDEO2 VIDEO3
/CLEAR
YELLOW BLUE
DISPLAY
C, X, x, c,
HOME
RETURN/
MENU
EXIT
PRESET REPLAY
PRESET
TUNING
–/+
TV
TV VOL
1
Press TUNER/BAND.
The last received station is tuned in.
You can change "FM" or "AM" by pressing
TUNER/BAND.
2
Press PRESET + or – repeatedly to
select the preset station.
Each time you press the button, the system
tunes in one preset station.
You can select the preset number directly by
pressing the number buttons.
3
Adjust the volume of the system.
To turn off the radio
Press "/1 to turn off the system, or change to
another function.
TV
AV
SYSTEM STANDBY
SAT/CATV DMPORT
TUNER/
TUNER/
BAND
BAND
ENT
RED GREEN
GUI MENU
TOOLS/
OPTIONS
MENU
ADVANCE PRESET
TUNING
TUNING
–/+
TV CH
continued
69
US