Field Of Application; Coating Materials Suitable For Use; Coating Materials Not Suitable For Use; Preparation Of The Workplace - WAGNER WallPerfect Flexio 990 Mode D'emploi

GB D

5. Field of application

Many different coating substances can be processed with the Flexio 990.
A different spray attachment must be used, depending on the coating substance:
Coating Materials
Water-soluble interior wall paint
(dispersions and latex paint)
Water- and solvent-based paints, finishes,
primers, 2-component paints, clear
finishes, automotive finishes, staining
sealers and wood sealer-preservatives.
All coating materials with the red Perfect
Spray logo

6. Coating Materials Suitable for Use

Water-soluble interior wall paint (dispersions and latex paint)
Water-based paints, finishes, primers, clear finishes, automotive finishes, staining sealers
and wood sealer-preservatives.
Attention! Never suck solvent-based materials directly via the suction system.
Pumps and hoses are not solvent resistant and could be damaged.

7. Coating Materials Not Suitable for Use

Materials that contain highly abrasive components, facade paint, caustic solutions and
acidic coating substances. Flammable materials.
The following materials can only be processed with optional
accessories
Fine plaster (maximum grain size 1 mm,TexPerfect spray attachment, order no. 2340 846)
Solvent-based wall paints (WallPerfect I-Spray spray attachment, order no. 2321 896)

8. Preparation of the workplace

Sockets and plugs must be masked. Risk of an electric shock as a
consequence of sprayed material entering the socket!
Mask all the areas and objects that are not to be spray painted, or
remove them from the work area. No liability is assumed for damage
due to overspray. Silicate paint corrodes glass and ceramic surfaces
upon contact! All such surfaces must therefore be completely covered.
36 36
WallPerfect Flexio 990 WallPerfect Flexio 990
Application tools
DirectFeed spray attachment
Perfect Spray spray attachment