WAGNER WallPerfect Flexio 990 Mode D'emploi page 51

WallPerfect Flexio 990 WallPerfect Flexio 990
•
Put the air screen (fig. 33, 4) in the air cap (3).
Put both on the nozzle (5) and secure with
the union nut (2).
•
Adjust the setting ring (fig. 34, 1) so that
the two "horns" grip the air cap and the red
adjustment lever (8) rests on the pin (9).
•
Click the setting ring into place on the union
nut.
•
Lubricate the seal (fig. 35, 4) on the pressure
reducer and the O-ring on the valve (3).
•
Insert valve (fig. 35, 3) into the pressure
reducer (2).
•
Insert the pressure reducer (fig. 35, 2) into
the spray attachment and secure with the
red catch (1).
•
Place the cover (fig. 36, 5) on to the spray
attachment and screw the material hose into
position (6).
1
2
3
4
2
9
5
6
GB D
5
4
3
1
8
49 49