Technical Data; Description (Fig. 1); Field Of Application - WAGNER WallPerfect W 665 Mode D'emploi

WallPerfect W 665
•
The units may only be used with a functional valve.
hose (Fig. 12 A, item 14) do not operate the unit further! Dismantle and clean the
ventilating hose, valve and diaphragm and replace the diaphragm if necessary.
•
Do not lay the spray gun.
•
The device is equipped with a thermal release which disconnects the device in case of
overheating. In this case, turn off the device, remove the plug and let the device cool
down for at least 1/2 hour. Eliminate the cause of heating, e.g. bent hose, soiled air filter,
slots for air intake covered.
With original WAGNER accessories and spare parts, you have the guarantee that all
safety regulations are fulfilled.
Max. viscosity:
Power source:
Power consumption:
Atomizing output:
Max. delivery rate
Double insulation:
Sound pressure level:
Oscillation level:
Air hose length:
Weight:
1 Air cup
2 Nozzle
3 Union nut
4 Gun body WallPerfect spray
attachment
5 Trigger guard
6 Material volume regulation
7 Handle
8 ON/OFF switch
9 Air hose

Field of application

WallPerfect W 665 has been specially developed for the application of interior wall
paints.
Special spray attachments are required to process low-viscosity materials such as
paints, glazes etc.. These can be found under "Accessories".
Coating Materials Suitable for Use
Interior wall paint (dispersions and latex paint)
Coating Materials Not Suitable for Use
Materials that contain highly abrasive components, facade paint, caustic solutions and

Technical Data

3000 mPaS
230 -240 V ~
350 W
105 W
270 ml/min
80 dB (A)
< 2.5 m/s²
3.5 m
4.0 kg

Description (Fig. 1)

If paints rises in the ventilating
10 Carrying belt
11 Air filter
12 Air screen
13 Mains lead
14 Spray gun holder
15 Container
16 Ventilating hose
17 Valve
18 Feed hopper
GB
15