WAGNER WallPerfect Flexio 990 Mode D'emploi page 40

GB D
•
Push the handle into the device
compartment. (Fig. 3)
•
Fold up the black bracket (fig. 4, 4) and
remove from the spray gun from the device.
•
Completely unwind the material hose.
The following steps are only
i
necessary if you want to convey
the material directly out of the
paint bucket. If you want to use
the PerfectSpray spray attachment,
please continue reading chapter 11.
•
Hold the height-adjustable attachment for
paint bucket (fig. 5, 5) at the side and pull
upwards.
•
Position the paint bucket on the ledge (fig. 6,
6) so that the bucket handle is between both
fixtures.
Important. The bucket handle
must be between both fixtures.
Otherwise the bucket could
be tipped by the weight of the
Flexio 990 system when being
transported and leak paint.

5
A
38 38
WallPerfect Flexio 990 WallPerfect Flexio 990


4

6