Field Of Application; Coating Materials Suitable For Use; Coating Materials Not Suitable For Use; The Following Materials Can Only Be Processed With Optional Accessories - WAGNER WallPerfect W 615 I-Spray Mode D'emploi

GB
19 Stirring rod
Replacement nozzle seal*
* This is inside the container: remove it before starting operations!

5. Field of application

WallPerfect W 615 has been specially developed for the application of interior wall
paints.
Special spray attachments are required to process low-viscosity materials such as
paints, glazes etc.. These can be found under "Accessories".

6. Coating Materials Suitable for Use

Interior wall paint (dispersions and latex paint)

7. Coating Materials Not Suitable for Use

Materials that contain highly abrasive components, facade paint, caustic solutions and
acidic coating substances. Flammable materials.
8. The following materials can only be processed with
optional accessories:
Water- and solvent-based paints, finishes, primers, 2-component paints, clear finishes,
automotive finishes, staining sealers and wood sealer-preservatives.

9. Preparation of the workplace

Sockets and plugs must be masked. Risk of an electric shock as a
consequence of sprayed material entering the socket!
Mask all the areas and objects that are not to be spray painted, or
remove them from the work area. No liability is assumed for damage
due to overspray.
Silicate paint corrodes glass and ceramic surfaces upon contact! All
such surfaces must therefore be completely covered.
22
Description/ Scope of delivery (Fig. 1)
WallPerfect W 615 I-Spray
20 Practice poster
Lubricating grease*