General Safety Instructions - Grizzly ERT 530 R Traduction De La Notice D'utilisation Originale

GB
The cutting head will
continue to rotate for a
few seconds after the
equipment has been
switched off. Keep
hands and feet well
away.
Remove the plug from the
mains. Immediately if the ca-
ble is damaged or cut.
Keep by-standers
well away. They
could be injured by
flung out objects.
L
Noise level rating L
WA
dB
Electrical appliances must not
be disposed of with the do-
mestic waste.
Protection Class II
Cutting circle

General safety instructions

Observe! When using the
machine, please observe
the safety instructions.
Operating the trimmer
CAUTION: How to avoid ac-
cidents and injuries:
Preparations:
• Never allow children and people
who are not familiar with these
Operating Instructions to use
100
•
•
•
in dB
WA
•
•
the trimmer. Local regulations
may stipulate a minimum age
for operators.
This appliance is not intended
for use by persons (including
children) with reduced physi-
cal, sensory or mental capabi-
lities, or lack of experience and
knowledge, unless they have
been given supervision or in-
struction concerning use of the
appliance by a person respon-
sible for their safety.
Children should be supervised
to ensure that they do not play
with the appliance.
Keep the equipment well away
from by-standers, children and
pets. Turn off the equipment if
they are in the vicinity.
Always wear appropriate work
clothes and personal protective
equipment! Always wear a face
shield or goggles as well as ear
defenders, boots or shoes with
non-slip soles, strong long trou-
sers and work gloves. Never
operate the equipment while
bare footed or wearing sandals.
The protective devices and
your personal protective equip-
ment will protect yourself and
other people and ensure that
the equipment can be smoothly
operated:
Never use the equipment if
it is damaged, incomplete or
has been modified without the
approval of the manufacturer.
Never operate the equipment
if the protective equipment is
defective. Before starting up the
equipment always check that
the equipment is in a perfectly
safe condition, especially the