Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Survey
1 Power cable
2 Upper handle
3 ON / OFF switch
4 Strain relief
5 Additional handle
6 Knurled nut and screw
7 Handle rod
8 Lever for handle rod adjustment
9 Screw sleeve to adjust the
length
10 Telescopic tube
11 Push-button for tilt angle adjust-
ment
12 Motor head
13 Chassis
14 Protective cover
15 Cutter head with line spool or
cutting thread
16 Spacing bow (flower protection)
17 Castor roll
18 Cord cutter
19 Nut for chassis mounting and
height adjustment
Functional description
The portable, hand-guided lawn trimmer is
powered by an electric motor. The trimmer
features a dual line spool as the cutting
device.
For grass trimming there are two nylon
threads rotating parallel with the ground
or, for vertical edge trimming, roughly per-
pendicular to the ground.
An additional chassis facilitates edge trim-
ming. A hood covering the cutting device
protects the user.
The following describes the functions of
the operating parts.
Safety instructions
Before starting to use the ap-
pliance you should know and
understand all its parts. Prac-
tice using the appliance and
have an experienced user or
expert explain its functionality,
method of operation and best
practices to you. Make sure
you can immediately shut
off the appliance in case of
emergency. Improper use of
the appliance may cause seri-
ous injury.
Symbols in the manual
Warning symbols with in-
formation on damage and
injury prevention.
Instruction symbols (the
instruction is explained at
the place of the exclamation
mark) with information on
preventing damage.
Help symbols with informa-
tion on improving tool han-
dling.
Symbols on the trimmer
Caution!
Read the operating instruc-
tions carefully.
Wear eye and ear protection
Do not expose the equip-
ment to the damp. Do not
work in the rain and do not
cut wet grass.
GB
99
Publicité
Chapitres
Table des Matières
Dépannage
