Logging On And Logging Off Handsets; Logging On Handsets; Logging Off Handsets - switel CD727 Mode D'emploi

9.4

Logging on and logging off handsets

9.4.1

Logging on handsets

Press and hold the page button
the new handset to the base station within 90 seconds.
Press the MENU display button on the mobile unit and select REGISTRATION from the menu with the
cursor.
Press the OK display button once. If the mobile unit has not yet been logged onto a base station, select
REGISTER HANDSET directly from the menu.
Press the OK display button. As you can connect a mobile unit to up to 4 base stations, a list will
appear. A star indicates whether the mobile unit has already been logged on to the base station.
Select the required base station (normally 1) and confirm with the OK display button.
Now enter the PIN code of the base station (factory setting 0 0 0 0) and confirm with OK. A search will
now be carried out for the base station.
As soon as the base station has been found, the registration number of the base station will appear in
the display. Confirm with OK. The mobile unit is logged on and can be used for external and internal
calls. An internal number will now be automatically assigned to the mobile unit. The main mobile unit
already logged on has the internal number 1. All further mobile units that are logged on will be
numbered in the sequence in which they were logged on (internal phone numbers 2 to 5). This internal
telephone number will be indicated on the right of the display next to the name.
9.4.2

Logging off handsets

A handset can only be logged off using another handset that is still logged-on. It is therefore not possible to
carry out the logging-off procedure using the handset that is to be logged off.
Press the MENU display button on the mobile unit and select REGISTRATION from the menu with the
cursor.
Confirm with the OK display button.
Select DE-REGISTER from the menu with the cursor and confirm with OK.
Now enter the PIN code of the base station (factory setting 0 0 0 0) and confirm with OK.
Use the cursor to select which mobile unit you want to log off and press OK.
Confirm the logging off with the YES display button and after a few seconds the mobile unit will be
logged off.
78
- Multiple mobile units -
on the base station until you hear two signal tones. Now log on