Operation; Switching The Handset On / Off - switel DCT 587 Combo Série Mode D'emploi

6 Operation

Many functions can be operated from both the base unit as well as the handset. Please note that
many of the keys depicted below are provided on both the base unit as well as the handset;
. Page 159.
However, when completing an operating sequence, you may not switch between oper-
ation on the base unit and operation on the handset. Before beginning with an operating
sequence, decide whether you want to complete it using the base unit or handset.

Switching the handset on / off

No calls are received on the handset when it is switched off.
No battery power is used when the handset is switched off.
No emergency calls can be made from the handset when it is switched off. The handset
must be switched on beforehand, which can take a little time.
2 sec. b
2 sec. b
Key lock 286
The key lock feature prevents functions assigned to keys being activated accidentally.
1 sec. t
Incoming calls can still be taken in the normal way even when the key lock function is
activated. Emergency (SOS) calls can still be made when the key lock function is active
(via the SOS call numbers).
1 sec. t
When the key lock is activated, the
The phone can be set−up so that the key lock is automatically activated after 90 seconds;
. Page 181.
Telephoning
Taking a call
In addition to the ringing tone, the visual call indicator lights up when a call is received.
{í}, a or è
Do not hold the handset too close to your ear when it rings as doing so could cause
hearing damage!
If the automatic answering function is activated, the call is taken by simply removing the handset
from the charging station; . Page 181.
Ending a call
b or é
You can also end the call by replacing the handset in the charging station.
Switch the handset on (in Standby mode)
Switch the handset off
Activate the key lock function
Deactivate the key lock function
,
icon appears in the display.
Take the call
End the call
Operation
287
171