Holding Conference Calls; Logging On And Logging Off Mobile Units; Logging On Cd728 Mobile Units; Logging On Other Dect-Gap Telephones To The Base Station - switel CD728 Mode D'emploi

11.3

Holding conference calls

An external call can be connected to a further internal subscriber as a conference call.
In this way, two mobile units can talk to the external caller simultaneously.
Establish the required connection with the external subscriber.
Then call the internal mobile unit. To do this, press the OPTIONS display button
and choose the INTERCOM function. Press the number of the required mobile
unit. You can also select the required mobile unit with the cursor and make the
connection with the OK display button. If the internal call is not accepted, press the
CANCEL display button and you will be connected to the external subscriber once
more.
If the internal call is accepted by the selected mobile unit, press the OPTIONS
display button again and choose the CONFERENCE function. Both internal mobile
units will now be connected to the external subscriber.
To end the conference call, press the OPTIONS display button on one of the
mobile units. Then select the EXIT CONF. function and confirm with OK. Only one
mobile unit will then remain connected to the external subscriber. The call can be
terminated here with the
11.4

Logging on and logging off mobile units

11.4.1 Logging on CD728 mobile units

Press and hold the page button
signal tones. Now log on the new mobile unit to the base station within 90
seconds.
If the mobile unit has not yet been logged on to a base station, press the REG.
display button. Otherwise, press the MENU display button. Then select SYSTEM
from the menu and confirm with OK.
Press the OK display button once.
Now enter the PIN code of the base station (factory setting 0 0 0 0) and confirm
with OK. A search will now be carried out for the base station.
As soon as the base station has been found, the internal number that has been
allocated to the mobile unit will appear briefly in the display. The mobile unit is
logged on and can be used for external and internal calls. An internal number will
be automatically assigned to the mobile unit. The main mobile unit already logged
on has the internal number 1. All further mobile units that are logged on will be
numbered in the sequence in which they were logged on (internal phone numbers
2 to 4). This internal telephone number will be indicated on the right of the display
next to the name.

11.4.2 Logging on other DECT-GAP telephones to the base station

In order to log on a DECT-GAP mobile unit from another manufacturer, follow the
instructions in the other supplier's operating manual and then press the
until you hear several signal tones.
Use the PIN-Code 0 0 0 0 to log on.
Due to the large number of different mobile units, it is not possible to guarantee all
the functions provided.
- Multiple mobile units -
button.
on the base station until you hear several
button
135