Muting The Microphone In The Handset; Switching The Key Lock Function On And Off; Information On The Range; Temporary Tone Dialling - switel BDT 650 duo Mode D'emploi

All manuals and user guides at all-guides.com
5.12

Muting the microphone in the handset

$
Press the button to deactivate the handset microphone during a call. You can then talk
to someone else without the caller being able to hear you. The loudspeaker in the handset
remains switched on, so that you can continue to hear the caller.
1. Press the
2. To switch the microphone back on, press the
button again. The
can hear you again.
5.13

Switching the key lock function on and off

If you carry the handset around a lot, you can lock the keypad so that buttons are not
inadvertently activated. Incoming calls can still be taken in the normal way even when the
key lock function is activated.
1. Press the
function is activated and the
2. To release the key lock function, press the
The key lock function is deactivated and the
display.
5.14

Information on the range

The handset has a range of approx. 50 meters in closed rooms and approx. 300 meters
outdoors. In the case of a good connection to the base station, the
continuously in the display.
Note: If the handset is moved too far from the base station, the
acoustic warning signals are issued. Move towards the base station, otherwise
the call will be disconnected.
5.15

Temporary tone dialling

If your telephone can only be operated using the PULSE dialling mode (refer to Chapter
10.4), you can still make use of the advantages provided by the TONE dialling mode.
During a call, you can temporarily switch to Tone dialling. To do this, press the
for 1 second. Numbers can then be transmitted using the digit keys (e.g. for remote access
to an answering machine). When the call is ended, the equipment switches back to PULSE
dialling.
5.16

Paging the handset from the base station

If you have misplaced the handset, press the Paging button on the base station. The
handset rings for 30 seconds, making it easy to find. To interrupt the function prematurely
before the 30 seconds has expired, press any button on the handset or the Paging button
on the base station.
134
- Operation -
$
button during a call.
p
icon disappears and the caller
" *
and buttons on the handset in succession. The key lock
$
j
icon appears in the display.
"
and
j
BDFUUUpr
*
buttons in succession.
icon disappears from the
r
icon appears
r
icon flashes and
*
01:34
button