Multiple Handsets; Logging On And Logging Off Handsets - switel D7210 Mode D'emploi

9

Multiple handsets

Up to four additional handsets can be logged on to your base station.
Note: Handsets from other manufacturers can also be integrated into the telephone
system by means of the internationally adopted GAP standard. In the same way, you
can use an SWITEL handset on base stations from other manufacturers, as long as
these units work using the GAP standard.
When you use multiple handsets you will have the following options:
- Internal calls between handsets.
- External calls can be forwarded between handsets.
- Incoming external calls are signalled on all handsets.
- An external call can be connected to a further internal subscriber as a conference
call.
- Room monitoring
Notes: If another handset is already using the external line, the message LINE BUSY
will appear on all handsets. In this case, it is not possible to make a further external call.
9.1

Logging on and logging off handsets

9.1.1 Logging on handsets
Button Display
PHONEBOOK
ANMELDEN
RD
3 x
BS 1 2 3 4
If the handset is already connected to a base station, the
corresponding numbers will flash.
Number pad Select the base station on the number pad.
1-2-3-4 PIN?
Number pad Enter the PIN Code (factory setting 0 0 0 0).
SEARCH
Press the button on the base station.
After a short time the handset will be logged on. The internal
number of the new handset will appear in the display.
- Multiple handsets -
141