Waring Commercial WFP14SCE Manuel D'utilisation page 8

(batch bowl assembly continued)
• Place the cover on the bowl, with the feed tube on the right, slightly toward the front. The locking
tabs on the cover should be at the left of the locking tabs on the rim of the work bowl.
• Rotate the cover counterclockwise to lock it into place. When the cover is rotated into place, the
safety interlock tab on the back rim of the cover will lock with the interlock mechanism.
NOTE: The cover must be in place correctly, with the cover's safety interlock tab firmly engaged, for
the food processor to operate. This is an important safety feature.
NEVER ATTEMPT TO START THE FOOD
PROCESSOR WITHOUT THE COVER LOCKED
INTO POSITION.
Two pushers for feed tube
Pick up the large food pusher and the small food pusher.
The large pusher is for processing larger vegetables. The smaller
pusher nests in the larger pusher and can be used for smaller
vegetables, guiding long thin vegetables for more precise cuts,
or for jobs like slicing pepperoni.
Large pusher
Insert the small food pusher into the large food pusher opening.
Now you are ready to insert the large pusher into the feed tube
opening. There is a "T" shaped insert on the back of the large pusher.
Align this with the "T" shaped hole on top of the interlock tower.
Push the pusher into the feed tube gently. The insert will activate
the interlock mechanism and your food processor is ready to operate.
NOTE: The pusher must be in place correctly, with the pusher's safety
interlock tab firmly engaged, for the food processor to operate.
This is an important safety feature.
Small pusher
To use the small pusher, lift it up and out of the large pusher.
When using the small pusher, the large pusher becomes the
feed tube for the small pusher.
8