Waring Commercial WFP14SCE Manuel D'utilisation page 11

Two Pushers for Feed Tube
Pick up the large food pusher and the small food pusher. The large pusher is for processing larger veg-
etables. The smaller pusher nests in the larger pusher and can be used for smaller vegetables, guiding
long thin vegetables for more precise cuts and for jobs like slicing pepperoni.
DISASSEMBLy OF CONTINUOUS FEED CHUTE PARTS
ALWAYS UNPLUG THE CORD BEFORE DISASSEMBLING.
• Turn the chute and cover clockwise until the safety interlock tabs are disengaged from the base.
When you rotate the chute, you will also disengage the chute's locking slots from the locking tabs on
the motor base platform.
• Remove the large food pusher from the feed tube to disengage interlock. Remove the small
pusher from the large pusher.
• To remove an accessory disc from the continuous feed chute, place two fingers under each side
of the disc and lift it straight up. Be careful not to touch the blades, as they are extremely sharp.
Follow directions on page 9 to remove stem from disc.
• Remove the continuous feed chute from the motor base. If the chute is pointing in the 4 o'clock
position, just lift it up.
11