Gama De Productos / Conexión Y Uso - Migatronic NAVIGATOR 2500 Manuel D'instruction

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 33
GAMA DE PRODUCTOS
NAVIGATOR 2500/3000 is a line of welding machines,
especially designed for welding in e.g. the sheet metal
and tube industries.
There are several versions of the machine: MMA, TIG
DC and TIG AC/DC. DC stands for welding with direct
current. AC stands for welding with alternating current.
All versions are designed for welding with coated
electrodes and are equipped with antifreeze, adjust-
able arc power and hot-start. Moreover, the machine
can be used for pulse welding with the possibility of
setting of pulse time, pause time and base amp.
In TIG welding the following functions are included:
-
adjustable slope up and slope-down
-
adjustable gas pre-flow and gas post-flow time
-
adjustable start Amp and stop Amp
-
adjustable reduced current
-
choice of 2-times-, 4-times- and spot welding
-
LIFTIG
-
HF-TIG
-
connection and disconnection of pilot arc
-
AC-balance
-
AC welding frequency
-
digital display
-
current control from the TIG torch handle
-
remote control facility (option)
-
programming of up to ten welding settings
In LIFTIG ignition the TIG arc is ignited after making
contact between the workpiece and the tungsten
electrode, after which the trigger is activated and the
arc established by lifting the electrode away from the
workpiece.
In HF-TIG ignition the TIG arc is ignited without con-
tact. A high-frequency (HF) impulse initiates the arc
when the trigger is activated.
Transportation equipment
The MIGATRONIC programme includes a transport
trolley which can be used for all versions.
Welding hoses
The machine can be equipped with TIG welding
hoses, electrode holders and return current cables
from the MIGATRONIC programme. If an adjustable
TIG torch is used, the welding current can be adjusted
from the torch.
External adjustment (option)
Remote control and foot control units can be delivered
to NAVIGATOR 2500/ 3000.
Torch cooling module (option)
An integrated torch cooling module can be delivered
which enables use of watercooled TIG welding torches
from the MIGATRONIC programme.
CONEXIÓN Y USO
Elevación de la máquina
Para deshacerse del producto al final de su
vida útil, siga según las normas y regla-
mentos locales.
www.migatronic.com/goto/weee
Configuración
Migatronic declina toda responsabilidad por
daños causados por el uso de cables y antorchas
cuyas dimensiones no correspondan a la corriente
utilizada.
Importante
Para evitar que se produzcan daños
en los tierra y la antorcha de
soldadura con la máquina enchufes
y cables, es necesario que se realice
un buen contacto del cable de
Advertencia
La conexión a generadores puede dañar la máquina
de soldar.
Una vez conectados a una máquina de soldar, los
generadores pueden producir grandes variaciones de
tensión susceptibles de dañar la máquina de soldar.
Utilícense generadores de tipo asíncrono.
Los defectos de la máquina de soldar derivados de la
conexión a un generador no están cubiertos por la
garantía.
Mains connection
NAVIGATOR 2500/3000 is designed for connection to
the mains voltage mentioned on the type plate. After
the mains plug has been connected to the mains cable
(6) the machine is ready for use. Please note that all
cable connections must be made by authorised and
qualified staff. Switch on and off the machine by
means of the breaker on the rear of the machine (5).
Gas connection
Connect the machine to the gas system by means of a
gas flow control.
74

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Navigator 3000

Table des Matières