MIETHKE proGAV Verification Tool Mode D'emploi page 31

proGAV ® Tools
4. Checking after adjustment
NOTE
If the valve setting cannot be checked con-
clusively using the Verification Tool or the
Verification Compass, we recommend carry-
ing out a check using an imaging method.
3.04.06 CLEANING RECOMMENDATION
FOR NON-STERILISABLE proGAV Tools
NOTE
The proGAV Tools are made from thermola-
bile components that are sensitive to heat
and moisture as well as chemically reactive.
Do not immerse the proGAV Tools in clean-
ing solutions or allow liquids to enter the
housing, as moisture, corrosion and impuri-
ties could impair proper functioning.
proGAV Tools
proGAV Tools
3.04.07 CLEANING AND DISINFECTING
THE proGAV Checkmate
Avoid damaging the product due to unsuit-
able cleaning agents/disinfectants and/or
too high temperatures!
Manual cleaning/disinfection
Mechanical cleaning/disinfection
EN