Location And Function Of Parts; Dkr-700/700P Main Unit - Sony DKR-700 Mode D'emploi

Location and Function of Parts

DKR-700/700P Main Unit

Power supply and data recording/deletion operations (front panel)
1 POWER u switch and indicator
POWER
POWER
MENU DISP
1 POWER u switch and indicator
Pressing this switch once turns on power to the unit,
and pressing it again turns the unit off. When the
power is on, the indicator will light up. If the BUSY
indicator is lit or blinking when you press the POWER
switch to power off, the unit powers off after internal
processing is completed.
2 Disc slot
For inserting discs.
3 BUSY indicator
When some operation is being performed on the disc,
or when some data remains on the DKR-700/700P's
memory, this indicator will be lit or will blink. When
the indicator is lit, all buttons except the EJECT button
4 will have no effect.
Caution
Do not disconnect the AC power cord from the
outlet while the BUSY indicator is lit or blinking. If
the power is disconnected while the disc is in
operation, data stored on the disc may be lost or
damaged.
8(E)
AUTO
PLAY
IMAGE LIST
PLAY
(
SEARCH
EXEC
+
-- - -
DIGITAL STILL RECORDER
BUSY
EJECT
6
CAPTURE REC
SOURCE
X r
...
AUTO
ALL
ERASE
ERASE
INIT
4 EJECT 6 button
Pressing this button will eject the disc.
5 REC r (record) button
When the button is pressed, it will light, and recording
will begin. When recording is complete, it will go out.
6 AUTO (automatic record) indicator
When an automatic record is being performed (using
the menus), this indicator will light.
For more information on automatic recording, see
"Recording Images Automatically — Interval Recording"
on page 24(E).
7 ALL ERASE/INIT button
This button is used to erase all images recorded on a
disc. It is also used to initialize discs.
Insert a disc which is to be erased, and press the
button. The button will begin to blink. When the
button is pressed a second time while it is blinking, it
will light steadily, and the all erasing will begin.
When inserting a disc which is not initialized or
initialized to a format incompatible with this unit, the
button will begin to blink automatically. To initialize
the disc press the button while it is blinking.
2 Disc slot
3 BUSY indicator
4 EJECT 6 button
5 REC r button
6 AUTO indicator
7 ALL ERASE/INIT button
8 ERASE button
9 CAPTURE X button
!º SOURCE ... button