Setting/Changing An Image Name - Sony DKR-700 Mode D'emploi

Setting/Changing an Image
Name
Setting an image name
1
Press the DISC/NAME key.
The image name input display appears.
Title:
[ ] Select [EXEC] End
Mm
2
Press the or key to display the cursor (_).
¿ ÷
Title:
[ ] Select [EXEC] End
Mm
3
Enter the desired character (up to 15 characters).
Each time a character is entered, the cursor will
move one position to the right.
Title:ABCDE
[ ] Select [EXEC] End Mm
4
Check the entered image name, and press the EXE
key if it is correct.
Note
The image name set is lost when the unit is
powered off.
Modifying a recorded image name
1
2
Cursor
3
4
Play back the image whose image name is to be
changed, using the procedures in "Playing or
Searching for Images" (page 26(E)).
Notes
• Be sure the disc is not write-protected.
• Play back the image with some mode other than
auto play. Image names may not be changed
while in auto play mode.
Press the DISC/NAME key.
The image name rewrite display appears.
[Rewrite]
Title:ABCDEF
[ ] Select [EXEC] End
Mm
Press the or key to display the cursor and
¿ ÷
move it to the position where character is to be
changed.
[Rewrite]
Title:ABCDEF
[ ] Select [EXEC] End Mm
Enter the desired character.
[Rewrite]
Title:ABCGEF
[ ] Select [EXEC] End Mm
(Continued)
35(E)