Sony DKR-700 Mode D'emploi page 48

Menu Operations
Using the User Setup menu
The User Setup menu allows the settings for all menus
to be registered as "user data," and recalled as needed.
Registering user data
Up to three different sets of user data may be created,
each identified with a number.
1
Set all menu items as desired, and then call up the
User Setup menu.
2
Press the or button/key to move the cursor
˘ ≥
to the "Save" line.
[User Setup]
Load: 1
Save: 1
[ ] Select [EXEC] Execute
µ Mm
3
Press the the or
÷
¿
register number of the current menu settings.
A number highlighted in reverse video is already
used.
[User Setup]
Load: 1
Save: 2
[ ] Select [EXEC] Execute
µ Mm
4
Press the EXEC button (or the EXE key on the
RM-C700).
The current menu settings are registered as user
data.
48(E)
to select 1, 2 or 3 as the
Recalling user data
1
Call up the User Setup menu.
2
Press the or button/key to move the cursor
˘ ≥
to the "Load" line.
[User Setup]
Load: 1
Save: 1
[ ] Select [EXEC] Execute
µ Mm
3
Press the or to select the number of the
÷
¿
desired user data.
The data whose number is highlighted in reverse
video can be recalled.
[User Setup]
Load: 2
Save: 1
[ µ Mm ] Select [EXEC] Execute
4
Press the EXEC button (or the EXE key on the
RM-C700).
The current menu settings are replaced with the
recalled user data, and the DKR-700/700P is in
source mode.