Positioning The Stand Assist Lift - Invacare Roze Manuel D'utilisation

Invacare® Roze™

5.2 Positioning the Stand Assist Lift

Refer to the Safety section in this manual and review the
information in 5.1 Safe Lifting, page 26 before proceeding
further and observe all warnings indicated.
Before positioning the legs of the patient lift under a bed,
make sure that the area is clear of any obstructions.
WARNING!
Risk of Injury
The lift could tip and endanger the patient and assistants.
– The legs of the lift must be in the maximum open
position for optimum stability and safety. If it is
necessary to close the legs of the lift to maneuver the
lift under a bed, close the legs of the lift only as long as
it takes to position the lift over the patient and lift the
patient off the surface of the bed. When the legs of
the lift are no longer under the bed, return the legs of
the lift to the maximum open position.
28
A UP Button
B DOWN Button
C Legs Open Button
1. Press the legs open button on the hand control to open the legs
of the stand assist lift to the maximum open position.
2. Position the stand assist lift using the mast handle.
3. Press the down arrow button on the hand control to lower the
lift arms for easy attachment to the sling.
D Legs Close Button
E Hand Control
1164940-D