Invacare Roze Manuel D'utilisation page 18

Invacare® Roze™
WARNING!
– If the battery charger is attached to the mast assembly
and is plugged into a wall outlet, make sure to unplug
the battery charger from the wall outlet BEFORE
using the patient lift. Failure to unplug the battery
charger may result in injury or damage.
1. Remove the two mylar pieces covering the mounting holes on
the back of the mast assembly.
2. Insert the hook screws into mounting holes.
3. Tighten the hook screws.
4. Mount the battery charger mounting bracket on the hook screws.
5. Charge the battery. Refer to 4.7 Charging the Battery, page 21.
18 1164940-D