Transferring Images To Your Computer - Minox DSC Notice D'utilisation

Transferring images to your computer

The MINOX DSC supports the following operat-
ing systems:
• Windows 2000/ME/XP/Vista
• Mac OS 9.x or OS X
Driver installation is not required. Older operating
systems are not supported.
Note: When connected to your switched-on
computer via the USB cable the MINOX DSC is
supplied with power and the battery is charged.
Refer also to section Charging the batteries.
Connecting your camera
to the computer
Always switch the DSC on and set the mode dial
to Playback mode before connecting it to the
computer. Then connect the camera to the com-
puter using the provided USB cable (connect the
smaller connector to the camera and the larger
one to the computer.)
When connecting the MINOX DSC to your compu-
ter for the first time the computer will recognize
it as new hardware. You computer automatically
installs the drivers. Wait until your computer in-
forms you that installation has been completed
before trying to access the images or video clips
stored in the camera or on the microSD card.
Note: If there is a microSD card installed in the
camera you can only access the data on this card.
To access any data in the internal memory of the
camera you must first remove the SD card.
43